Symptom: After printing dozens of sheets on 80 grams of paper, the customer encountered paper jams J032 J034. Reason: Upon arrival at the site, it was observed that 20 sheets were tested and found to be flat and stuck on the PTB belt, or stuck on the fixed paper output ..
Symptoms: Pro 8200 starts up and reports an error SC899-00, accompanied by a SC860-00 jump in the lower left corner, SC870-01, cannot enter the maintenance mode, and the machine becomes an all-English interface. reason: control...
Symptom: Poor print quality on the Pro8200S, with adhesive overflow from the labels causing a paper jam (J036). Reason: After the adhesive is fixed, the front end is bent downward and there is overflow glue. The overflow glue sticks to an iron plate at the exit, causing paper jam J...
Reason: 1 Confirmed with the customer that the outer side of the saddle nail may have a problem with the binding head. After changing the binding box, the binding head is still on the outer side It can be basically concluded that there is a hardware malfunction on the binding side, and we will start dismantling the saddle stitch binding module 3 Decompose the binding module ..
Symptom: After the machine is turned on, it reports codes SC471-01, 04, and 05. The transfer belt runs off, and adjusting the deviation roller cannot solve the problem. Reason: The explanation for SC471-01, 04, and 05 in the maintenance manual is: 1. Grinding of the image transfer belt ..
Symptom: There are black lines printed in the secondary scanning direction. Specific situation: The total count of 8300 is over 4 million, and the customer's monthly printing volume is 600000 A4. There has been a buildup of powder during ITB cleaning Reason: On the first day, the customer reported a repair ..
Symptom: During the printing process, the color of the copy becomes lighter and then an error SC361-01 is reported. After restarting the self-test, an error is reported. The left image shows the faulty sample, and the right image shows the repaired sample. Reason: Fault description: TD sensor output error 1: V
Symptom: Customer reports that vertical bars appear on printed covers and documents with gray or semi-black backgrounds. Test printing with 50% black documents, with obvious vertical bars. Reason: The on-site test confirmed that the paper had not been fixed and hung after 2 turns...
Symptom: The customer printed yellow special paper with folded corners and wrinkles. Reason: Possible causes of malfunction: 1 Poor fixing unit 2 There are obstacles on the paper path Paper curling solution under heat: 1 The fault of printing on ordinary white paper has not reappeared ..
Symptoms: Customers report that even if the machine is ready for preheating, the first print job needs to wait for a long time, resulting in a decrease in customer production efficiency and a long wait on the side of the machine. Since the customer’s application scenario involves on-demand printing, many users...