Q: One original powder can print less than 2 kilometers. When I turned on the machine, I found that a lot of powder was leaking onto the transfer roller. After removing the developer and cleaning the ID sensor, would the 3103Vsp value of 0.07 be too low and still require a large amount of powder?
Answer:Vsp0.07 is too high, is Vsg around 4.0V? Clean the ID sensor, pull the blackboard and see if the Vsp value can increase to around 0.4, then perform carrier initialization again
Tags: #W7100 #W8140SP #Transfer roller #vermicelli made from starch #Ricoh #Engineering machine
